Results 1 to 2 of 2

Thread: Optical/Photocell (TTL Pulse) to trigger a mocap system

  1. #1
    Join Date
    Jan 2011
    Location
    Chicago
    Posts
    28

    Optical/Photocell (TTL Pulse) to trigger a mocap system

    I have a request and now seeking sources to enable a customer to trigger a mocap system (Qualisys in this case) using an optical eye. The trigger needs to generate a TTL +/- 5v signal. The QTM software can then utilize this pulse to Start, Start/Stop, or Stop the data collection.

    If anyone has sources or experiences please let me know.

    Dan India
    Daniel India, VP Americas
    Qualisys North America, Inc.
    1603 Barclay Blvd
    Buffalo Grove, IL 60089 USA

    847-945-1411
    Dan.India@qualisys.com

  2. #2

    Re: Optical/Photocell (TTL Pulse) to trigger a mocap system

    That is a simple analog circuit to build for less than 15 USD or an easy job for an Arduino or a Raspberry Pi connected up to a photocell to accomplish digitally for less than 40. There are large internet communities that will describe how to build either project. Alternatively, perhaps you could modify a garage door photocell safety sensor system to get the voltage you need like this product https://www.amazon.com/gp/product/B0...736184-1310369.

    - Ed Morra -

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •