PDA

View Full Version : Help on camera calibration !



Nachiappan Chockalingam
04-23-2002, 10:02 PM
Dear All,

We are after a Matlab Program that can give us the camera location during
motion analysis calibration.

We have a system, which can track the movment of LED's. Hardware and software
for this system is developed in house and it works fine.

The input for this system is 6 camera parameters. X,Y,Z of camera location and
3 camera rotations. At the moment, the camera's are setup and these six
parameters are manually measured and entered to get the system going.

We would like to automate this procedure. We are aware of programs available
for DLT transformation, which gives the DLT coeff., However, we would like to
get these six parameters; instead of measuring them manually and to leave the
tracking software working as it is.

We would be grateful to receive any ideas, "off the self" matlab routines or
any references...

Thanks for your help in advance ...

Cheers

Nachi.


Nachiappan Chockalingam
School of Health
Staffordshire University
Leek Road
Stoke on Trent ST4 2DF
United Kingdom

Phone: 01782 295853
Fax: 01782 294321
e-mail: N.Chockalingam@staffs.ac.uk

---------------------------------------------------------------
To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://isb.ri.ccf.org/biomch-l
---------------------------------------------------------------