PDA

View Full Version : Re: question about direction of torque vector



wrose75
08-26-2005, 01:48 AM
Dai,

There definitely is practical value in knowing the direction of the torque
vector. Torque tends to cause rotation. The direction of the torque vector
is the axis of the rotation (and as you mentioned, the direction of rotation
about the axis is determined using the right hand rule). By knowing the
torque vector you can compare it to the desired axis of rotation to see how
well they match. Examples: 1. If you are using a wrench on a nut, you want
the torque vector aligned with the shaft of the screw to have the most
effect on the nut and the least chance of bending the shaft. 2. Does the
torque about the knee joint correspond to the normal anatomical axis of
rotation of the joint? 3. An ice skater working on jumps could benefit from
knowing how well the direction of the pre-takeoff torque vector corresponds
to the desired in-flight axis of rotation.

Bill Rose
University of Delaware

----- Original Message -----
From: "Dai Nishikawa"
To:
Sent: Friday, August 26, 2005 12:09 AM
Subject: [BIOMCH-L] question about direction of torque vector


>I have a simple question regarding the direction of torque vectors and I
>would appreciate if anyone give me tips: I understand torque vectors are
>orientated perpendicular to the plane in which the moment arm and force
>vectors exist and the right-hand-thumb rule is used to tell whether it is
>orientated at the right angle into or out of the page. My question is: what
>is the practical use of knowing the direction of torque vectors?; Are they
>just concepts which faciltate the understanding of dynamic forces?
>
> Regards
> Dai Nishikawa