PDA

View Full Version : Non-interlace video format in motion analysis system



jluk49
08-01-2007, 10:42 AM
Dear Colleagues,

I would like to know if anyone have an experience in using of
non-interlace video materials in a video-based motion analysis system
such as PEAK, SIMI, APAS, etc.

I would like to purchase an industrial grade high speed video camera
(e.g. Basler), which is a non-interlace format video camera, for
motion analysis purpose.

The major problem need to be solved is the filming rate recognition
in the motion analysis software. A 100Hz non-interlace video file may
recognize as 200Hz filming rate in the motion analysis software due
to the video formatting.

I have put the video file in APAS for testing which indicated a
double filming rate in calculation process. I need to confirm the
workability between non-interlace video files and video-based motion
analysis system before purchasing.

I also try to find some software (such as Labview) to convert the
non-interlace video into interlace video but didn't success.

Please provide some suggestions or solutions in this situation
(non-interlace + video-based motion system).

Thank you for your attention.

Best regards,

Jim Luk



*****************************************
Lecturer
Department of Physical Education
Hong Kong Baptist University
Tel: (852) 3411 3109
Fax: (852) 3411 3356
Email: jimluk@hkbu.edu.hk

Mailing Address:
Hong Kong Baptist University
13/F, Shek Mun Campus
8 On Muk Street, Shek Mun, Shatin
*****************************************