PDA

View Full Version : Re: FREE casting material



jcallaghan92
05-28-1997, 01:47 AM
Hi:
I am writing from Stuart McGill's lab here at Waterloo. Any idea
what the shipping costs would be to Canada and if there would be any
problem in crossing the boarder? Incidently why are you giving it away?

Jack
Lab Manager

-- /\ ____ Jack Callaghan Doctoral Candidate
/ \/\ ____ __o email callagha@healthy.uwaterloo.ca
/\/ \ ___ _\ Hi everyone,
>
> we are giving away casting material for free. It can be used for embedding
> specimens for mechanical testing. The special advantage of this casting
> material is the low temperature at which it hardens. These components
> harden around room temperature unlike for example PMMA. It allows 5 - 7
> minutes handling time and is hard after 20 - 30 minutes. Wax, silicone, or
> Vaseline for casting release agents can be used. The containers are still
> sealed and have been stored in proper manner.
>
> It is a two component easy to use system manufactured by:
> EPIC RESINS
> 600 Industrial Blvd.
> Palmyra, WI 53156
>
> Component 1:
> Product Class: Polymeric Polyol
> Product Code: S7140AS
> Ingredients: Polyether Polyol (15%)
> Glycol (15%)
> Castor Oil (5%)
> Texanol Isobutyrate (65%)
> Amount: 2 gallons
>
> Component 2:
> Product Class: Aromatic Isocyanate
> Product Code: S7140B
> Ingredients: MDI Mixed Isomers (10%)
> High Oligomers of MDI (50%)
> Aromatic Diisocyanate (40%)
> Amount: 1 gallon
>
>
> I recommend that only people who have used this material before respond to
> this message. Material Safety Data Sheets are available.
>
> This material is FREE, but we expect you to pay the shipping costs.
>
> For more info please contact: Michael Liebschner
> 802-656-1432
> mliebsch@emba.uvm.edu
>
> ************************************************** **********
> Dipl.-Ing. Michael Liebschner E-mail: mliebsch@emba.uvm.edu
> University of Vermont
> Mechanical Engineering Phone: (802) 656-1432
> 119 Votey Building
> Burlington, VT 05405 Fax: (802) 656-4441
> ************************************************** **********
> You can not solve problems with the same level of thinking
> that existed when the problems were created.
> --Dr. Albert Einstein
>
> -------------------------------------------------------------------
> To unsubscribe send UNSUBSCRIBE BIOMCH-L to LISTSERV@nic.surfnet.nl
> For more information: http://www.kin.ucalgary.ca/isb/biomch-l.html
> -------------------------------------------------------------------
>