PDA

View Full Version : need telemetered footswitch system



mpbesser18
09-09-1998, 01:58 AM
Fellow biomech-l folks:

A colleague wants to measure foot switch or ankle goniometric data during
walking. She is looking for onset of fatigue, and is looking for 'foot drop'
- either as a change in ankle angle (if using goniometry) or as a change in
the timing between initial contact and foot flat (if using foot switches).
She does NOT want to use a treadmill - thus, the system needs to be untethered
(either telemetered or collect for a time, then download data). She needs to
be able to collect for at least 30 minutes before downloading, but at a fairly
low sampling rate (tens or hundreds of samples per second, not thousands).

And, of course, the budget for this project is very limited. So, my question
for the group:

1) Do you know of (or own) a system that can do this?
2) Who makes it? If it is home made, would you share the plans/schematics?
3) If you represent the company, would you lend or lease this equipment for a
short period of time?

Replies will be summarized and posted. Thanks in advance.

Marc

---------------------------------------------------------------------------
Marcus P. Besser, PhD []
Assistant Director, Human Performance Laboratory _ /_/
Assistant Professor, Department of Physical Therapy / /
Thomas Jefferson University / \
Philadelphia, Pennsylvania, USA 19107-5233 /_ \_
Phone:215-503-1645 Fax:215-503-3499 email: marcus.besser@mail.tju.edu
---------------------------------------------------------------------------

-------------------------------------------------------------------
To unsubscribe send UNSUBSCRIBE BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://www.bme.ccf.org/isb/biomch-l
-------------------------------------------------------------------