PDA

View Full Version : pressure sensitive bubbles needed



Frieder A. Grieshaber
09-30-1998, 07:27 PM
Hello,

we need an indicator for pressure in water, which should contain something
like small bubbles in the state of suspension in water. The size of these
bubbles should be smaller than 0.01 mm. The pressure we expect is of order
of 10000 Pa.

Usually you use a hydrophone but this is not possible in this case.


Thanks for all ideas.

Frieder Grieshaber
fg@bmt.uni-stuttgart.de

Institute of Biomedical Engineering
University of Stuttgart
Seidenstrasse 36
D-70174 Stuttgart

Tel.: 0049-711-121-2368
Fax: 0049-711-121-2371

BEGIN:VCARD
VERSION:2.1
N:Grieshaber;Frieder;A.
FN:Frieder A. Grieshaber
ORG:Uni Stuttgart / BMT
TITLE:Assistant
TEL;WORK;VOICE:(+49) 0711 / 121-2368
TEL;WORK;FAX:(+49) 0711 / 121-2371
ADR;WORK:;;Seidenstr. 36;Stuttgart;;70174;Germany
LABEL;WORK;ENCODING=QUOTED-PRINTABLE:Seidenstr. 36=0D=0AStuttgart 70174=0D=0AGermany
EMAIL;PREF;INTERNET:fg@bmt.uni-stuttgart.de
REV:19981001T092751Z
END:VCARD