Tweet
Stanley,
At one time we had a National Instruments card running Labview in a
desktop computer. The Pedar system was connected to the parallel port on
the same computer. We didn't need to run both at once but could probably
have used Labview's execute routine to do it. We now have EMG on one
desktop computer and Pedar on another. A video mixer is used to show
both on a TV/VCR.
Dave Grimshire
Technician
School of Health and Human Performance
Dalhousie University
On
Wed, 20 Sep 2000, stanley wrote:
> I have some questions about EMG & Pedar.......
> How to set up those two system in one notebook or PC ?
>
> I set up the EMG system which is connected to the notbook by a DAQcard,
> and I need to use the Pedar system & EMG at the same time.
> How to connect those two system together & to run at the same time ?
>
> Here is the instrument specification:
> 1.MA300 EMG system
> NI DAQcard & Labview interface
> 2.Pedar & Pedar standard software
> 3.Acer travelmate 370 notebook
>
>
> --------------------------------------------------------------------------------
> Sincerely,
> Stanley Shih
> Institute of Biomedical Eng., Yang-Ming University
> 155, Sec.2, Li-Nung St., Taipei, Taiwan 112
> Email: chwshih@bme.ym.edu.tw, Tel: (886) 28267000~5480, Fax: (886) 28267000~5479
>
> ---------------------------------------------------------------
> To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
> For information and archives: http://isb.ri.ccf.org/biomch-l
> ---------------------------------------------------------------
>
---------------------------------------------------------------
To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://isb.ri.ccf.org/biomch-l
---------------------------------------------------------------
At one time we had a National Instruments card running Labview in a
desktop computer. The Pedar system was connected to the parallel port on
the same computer. We didn't need to run both at once but could probably
have used Labview's execute routine to do it. We now have EMG on one
desktop computer and Pedar on another. A video mixer is used to show
both on a TV/VCR.
Dave Grimshire
Technician
School of Health and Human Performance
Dalhousie University
On
Wed, 20 Sep 2000, stanley wrote:
> I have some questions about EMG & Pedar.......
> How to set up those two system in one notebook or PC ?
>
> I set up the EMG system which is connected to the notbook by a DAQcard,
> and I need to use the Pedar system & EMG at the same time.
> How to connect those two system together & to run at the same time ?
>
> Here is the instrument specification:
> 1.MA300 EMG system
> NI DAQcard & Labview interface
> 2.Pedar & Pedar standard software
> 3.Acer travelmate 370 notebook
>
>
> --------------------------------------------------------------------------------
> Sincerely,
> Stanley Shih
> Institute of Biomedical Eng., Yang-Ming University
> 155, Sec.2, Li-Nung St., Taipei, Taiwan 112
> Email: chwshih@bme.ym.edu.tw, Tel: (886) 28267000~5480, Fax: (886) 28267000~5479
>
> ---------------------------------------------------------------
> To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
> For information and archives: http://isb.ri.ccf.org/biomch-l
> ---------------------------------------------------------------
>
---------------------------------------------------------------
To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://isb.ri.ccf.org/biomch-l
---------------------------------------------------------------