Tweet
Dear all,
I posted a few weeks ago a question on Pressure Sensor
Matts, , I
would like to thank all of you who responded. Below a
summary of responses
> Dear all,
> I am doing my thesis on Pressure Sensor Mats and I
> want to
> know the actual types of them (capacitive,
> resistive..) and which
> parameters have influence in these sensors, like
> temperature,
> humidity…
> For the validation of these sensors, does anyone
know
> about a
> normative
> procedure? Has somebody experience with such
> procedures, usage of
> them or
> developed own testing procedures to validate within
a
> particular
> research
> study?
> Has each kind of sensor its particular test?
> Does anyone have any information about above or
> suggestions who to
> contact?
> I thank all of you in advance for your help.
> Sincerely,
> Silvia
ELTEK SYSTEMS" elteksystems@vsnl.com wrote:
Dear Silvia,
Pl. see www.rsscan.com. They make footscan plate using
pressure sensor
mat.
Pl. talk to Mr. Wim Lambrechts - Research & Marketing
greetings / Atul
############
Charles Malacaria CMalacaria@tekscan.com wrote:
Dear Ms. Diaz:
I read your posting on the BIOMCH forum regarding
pressure sensing
mats. My
company makes such devices. How can we assist you?
Where are you
located?
Regards,
Charles Malacaria
Vice President Business Development
#################
"Sangwoo Scientific" wrote:
Dear Silvia
I read your request on ErgoWeb Discussion digest ,
please contact
Dr. Axel Kalpen / Novel gmbh who will be able to
provide necessary
information .
Sincerely
Sung / Sangwoo / Korea swsci@shinbiro.com
##########
"AJ Frank" aj@vistamedical.org wrote:
I represent the company that pioneered the FSA
pressure mapping system.
There are well over 1000 of these units in use around
the world. They
are
used in rehabilitation medicine, industrial design,
automotive seat
design
etc.
Our website is www.pressuremapping.com.
Attached is a report released last year about three
common used units.
Novel/Pliance is not included because it is not
typically seen outside
of
gait labs due to its high cost.
Our system is not affected by temperature or humidity,
a common problem
with
capacitance systems.
Please feel free to contact me if you need more
information.
Andrew Frank
This message had 2 documents attached:
1.Comparative_analysis_of_pressuremap_systems.rtf
2. Which_Way_is_Your_Tush_Leaning_2.doc
Anyone who wants any of them , just contact me
###########################
Friso Hagman" friso.hagman@vub.ac.be wrote:
Hello Silvia,
for the rsscan pressure plate and insole system you
can find this
information direct www.rsscan.com or indirect by going
to the site
where you
are able to find the contact information for Wim
Lambrechts,
responsible for
Research and Sales at Rsscan
Have a nice one,
friso
##################
Wagner de Godoy wrote:
Dear Ms. Silvia Diez,
perhaps you get some specifications with the
manufacturers:
- RsScan International
http://www.rsscan.com/
- Novel
http://www.novel.de/
- Tekscan
http://www.tekscan.com/
Best Regards,
Wagner de Godoy
Gait Laboratory
mailto:labmarcha@aacd.org.br
mailto:wagner.godoy@bol.com.br
ICQ: 121658600
AACD - Associação de Assistência à Criança Deficiente
Disabled Children Care Association
Brazil
###################
The received message was written in Spanish, here
only a summary of it is given:
Ricard Barberà i Guillem :
Actually, there is a first draft normally about tests
in antislough cushions. The title is: Wheelchair
Seating Part 2:
Test methods for devices intended to manage
tissue integrity - Seat cushion. You can ask for it an
AENOR http://www.aenor.es/.
In the chapter of pressure, are included forms to
calibrate these sensors, form to take the
measurement...
Actually, we are using the Novel Pliance, but there
are at least three or four types in the market.
Best regards,
Ricard Barberà i Guillem
rbarbera@ibv.upv.es
Ajudes tècniques
***********************************
Institut de Biomecànica de València
Institute of Biomechanics of Valencia
http://www.ibv.org
tel: 96 136 60 32
fax: 96 136 60 33
########################
El¿bieta Maklewska wrote:
Dear Silvia,
I am very interested in your summary, because I an
gathering materials
,
information about measuring of pressure of medical
hossiery, socks and
burn
garment.
Look at www.tekscan.com.
Regards
Elzbieta
=========
==================
El¿bieta Maklewska
INSTITUTE OF KNITTING
TECHNIQUES
AND TECHNOLOGIES
Clothing Research Division
http://www.tricotextil.lodz.pl
e-mail: elamak@tricotextil.lodz.pl
__________________________________________________ _____________
Do You Yahoo!?
Yahoo! Messenger
Comunicación instantánea gratis con tu gente.
http://messenger.yahoo.es
---------------------------------------------------------------
To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://isb.ri.ccf.org/biomch-l
---------------------------------------------------------------
I posted a few weeks ago a question on Pressure Sensor
Matts, , I
would like to thank all of you who responded. Below a
summary of responses
> Dear all,
> I am doing my thesis on Pressure Sensor Mats and I
> want to
> know the actual types of them (capacitive,
> resistive..) and which
> parameters have influence in these sensors, like
> temperature,
> humidity…
> For the validation of these sensors, does anyone
know
> about a
> normative
> procedure? Has somebody experience with such
> procedures, usage of
> them or
> developed own testing procedures to validate within
a
> particular
> research
> study?
> Has each kind of sensor its particular test?
> Does anyone have any information about above or
> suggestions who to
> contact?
> I thank all of you in advance for your help.
> Sincerely,
> Silvia
ELTEK SYSTEMS" elteksystems@vsnl.com wrote:
Dear Silvia,
Pl. see www.rsscan.com. They make footscan plate using
pressure sensor
mat.
Pl. talk to Mr. Wim Lambrechts - Research & Marketing
greetings / Atul
############
Charles Malacaria CMalacaria@tekscan.com wrote:
Dear Ms. Diaz:
I read your posting on the BIOMCH forum regarding
pressure sensing
mats. My
company makes such devices. How can we assist you?
Where are you
located?
Regards,
Charles Malacaria
Vice President Business Development
#################
"Sangwoo Scientific" wrote:
Dear Silvia
I read your request on ErgoWeb Discussion digest ,
please contact
Dr. Axel Kalpen / Novel gmbh who will be able to
provide necessary
information .
Sincerely
Sung / Sangwoo / Korea swsci@shinbiro.com
##########
"AJ Frank" aj@vistamedical.org wrote:
I represent the company that pioneered the FSA
pressure mapping system.
There are well over 1000 of these units in use around
the world. They
are
used in rehabilitation medicine, industrial design,
automotive seat
design
etc.
Our website is www.pressuremapping.com.
Attached is a report released last year about three
common used units.
Novel/Pliance is not included because it is not
typically seen outside
of
gait labs due to its high cost.
Our system is not affected by temperature or humidity,
a common problem
with
capacitance systems.
Please feel free to contact me if you need more
information.
Andrew Frank
This message had 2 documents attached:
1.Comparative_analysis_of_pressuremap_systems.rtf
2. Which_Way_is_Your_Tush_Leaning_2.doc
Anyone who wants any of them , just contact me
###########################
Friso Hagman" friso.hagman@vub.ac.be wrote:
Hello Silvia,
for the rsscan pressure plate and insole system you
can find this
information direct www.rsscan.com or indirect by going
to the site
where you
are able to find the contact information for Wim
Lambrechts,
responsible for
Research and Sales at Rsscan
Have a nice one,
friso
##################
Wagner de Godoy wrote:
Dear Ms. Silvia Diez,
perhaps you get some specifications with the
manufacturers:
- RsScan International
http://www.rsscan.com/
- Novel
http://www.novel.de/
- Tekscan
http://www.tekscan.com/
Best Regards,
Wagner de Godoy
Gait Laboratory
mailto:labmarcha@aacd.org.br
mailto:wagner.godoy@bol.com.br
ICQ: 121658600
AACD - Associação de Assistência à Criança Deficiente
Disabled Children Care Association
Brazil
###################
The received message was written in Spanish, here
only a summary of it is given:
Ricard Barberà i Guillem :
Actually, there is a first draft normally about tests
in antislough cushions. The title is: Wheelchair
Seating Part 2:
Test methods for devices intended to manage
tissue integrity - Seat cushion. You can ask for it an
AENOR http://www.aenor.es/.
In the chapter of pressure, are included forms to
calibrate these sensors, form to take the
measurement...
Actually, we are using the Novel Pliance, but there
are at least three or four types in the market.
Best regards,
Ricard Barberà i Guillem
rbarbera@ibv.upv.es
Ajudes tècniques
***********************************
Institut de Biomecànica de València
Institute of Biomechanics of Valencia
http://www.ibv.org
tel: 96 136 60 32
fax: 96 136 60 33
########################
El¿bieta Maklewska wrote:
Dear Silvia,
I am very interested in your summary, because I an
gathering materials
,
information about measuring of pressure of medical
hossiery, socks and
burn
garment.
Look at www.tekscan.com.
Regards
Elzbieta
=========
==================
El¿bieta Maklewska
INSTITUTE OF KNITTING
TECHNIQUES
AND TECHNOLOGIES
Clothing Research Division
http://www.tricotextil.lodz.pl
e-mail: elamak@tricotextil.lodz.pl
__________________________________________________ _____________
Do You Yahoo!?
Yahoo! Messenger
Comunicación instantánea gratis con tu gente.
http://messenger.yahoo.es
---------------------------------------------------------------
To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://isb.ri.ccf.org/biomch-l
---------------------------------------------------------------