Announcement

Collapse
No announcement yet.

Sync pulse with LDM300C sport - query.

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sync pulse with LDM300C sport - query.

    A question regarding Jenoptiks I.R. Laser Distance Measurement Module -
    LDM300C Sport.

    I'm interested in combining (superimposing) an additional
    external signal pulse together with LDM-300's data.
    (Incidentally, this unit supersedes the older LAVEG binocular version).
    This extra pulse would essentially act as an "event marker" and come
    from say, a light gate, for example.

    I've carried out some preliminary tests and found the format and
    protocol of the data-stream to be a decimalised 8-bit distance value
    (in meters) with the stop bit at the front end - sounds simple enough.

    It looks to me like something that an I/O card and a bit of program
    code such as LabView should be able to handle. But before I jump the
    gun (no pun intended), has anyone carried out a similar task before with
    this unit or even with the LAVEG unit, and if so, what were your
    findings ?

    Any advice would be appreciated.

    Kind regards,
    --------------------------------------------------------------------------
    Andreas Wallbaum
    Tech. Officer, Biomechanics
    Dept. Sport & Exercise Science
    University of Bath, UK
    Ph +44 (0) 1225 383371
    Fax +44 (0)1225 383275
    E-Mail: A.Wallbaum@bath.ac.uk

    * This e-mail message was sent with Execmail V5.1 *

    ---------------------------------------------------------------
    To unsubscribe send SIGNOFF BIOMCH-L to LISTSERV@nic.surfnet.nl
    For information and archives: http://isb.ri.ccf.org/biomch-l
    ---------------------------------------------------------------
Working...
X