Announcement

Collapse
No announcement yet.

Summary of EMG surface elctrodes for Noraxon

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Summary of EMG surface elctrodes for Noraxon

    Dear subscriber:

    The following is the summary of EMG surface electrodes for Noraxon
    I received. Great appreciation to all who respond.

    > ================================================== =====================
    > Fong-Chin Su | On leave: July 1, 93-June 30, 94
    > Institute of Biomedical Engineering| Orthopedic Biomechanics Lab
    > National Cheng Kung University | Mayo Clinic/Mayo Foundation
    > Tainan, TAIWAN | Rochester, MN 55905
    > TEL:886-6-275-7575 ext 63422 | TEL: 507-284-8941
    > Fax:886-6-234-3270 | FAX: 507-284-5392
    > Email:fcsu@biomech.bme.ncku.edu.tw | Email: suf@mayo.edu
    > ================================================== =====================


    From: SMTP%"BI_RSMITH@cchs.su.edu.au" 2-AUG-1993 17:15:01.10
    To: SUF
    CC:
    Subj: RE: EMG surface electrodes for Noraxon

    Date: Tue, 3 Aug 1993 8:16:14 +1000 (EST)
    From: BI_RSMITH@cchs.su.edu.au
    To: SUF@RCF.MAYO.EDU
    Message-Id:
    Subject: RE: EMG surface electrodes for Noraxon

    Dear Fong-Chin,
    We also have a Noraxon Telemyo EMG system. We use Medi-Trace Pellet
    Electrodes ECE 1801. Contrary to Noraxon's advertising the system seems to
    allow as much movement artefact as any other system. We have to take as
    much care with preparation of the subject as ever. That is, we prepare with
    shaving then abrading the area lightly with fine sandpaper then alcohol
    swab. When attaching the electrodes we tape the wires but not the electrode
    Hope you have plenty of success with your system.
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    + Richard Smith e-mail: bi_rsmith@cchs.su.EDU.AU +
    + Head, Biomechanics Division, Department of Biological Sciences, +
    + Faculty of Health Sciences, ,-_|\ +
    + The University of Sydney voice: +61 2 646 6462 / \ +
    + East Street, Lidcombe, NSW 2141 fax: +61 2 646 6520 \_,-._* +
    + AUSTRALIA v +
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


    From: SMTP%"mrodgers@valhalla.cs.wright.edu" 3-AUG-1993 09:50:21.61
    To: SUF
    CC:
    Subj: noraxon electrodes

    From: mrodgers@valhalla.cs.wright.edu (M. Rodgers)
    Date: Tue, 3 Aug 1993 10:50:11 -0400
    Posted-Date: Tue, 3 Aug 1993 10:50:11 -0400
    Message-Id:
    To: suf@mayo.EDU
    Subject: noraxon electrodes

    Fong-Chin Su;
    We are using disposable electrodes from NDM. The order information is:
    Baxter Hospital Supply
    2320 McGall Rd.
    Obetz, OH 43207-4898

    Catalog number:65374-260
    TenderTrace Neonatal ECG electrodes ($202.50/case)

    Hope this is helpful.
    Mary Rodgers



    From: SMTP%"jpscholz@bach.udel.edu" 4-AUG-1993 15:40:16.25
    To: SUF
    CC:
    Subj: Re: EMG surface electrodes for Noraxon

    Date: Wed, 4 Aug 1993 16:34:10 -0400 (EDT)
    From: John Scholz
    Subject: Re: EMG surface electrodes for Noraxon
    To: Fong-Chin Su
    In-Reply-To:
    Message-Id:
    Mime-Version: 1.0
    Content-Type: TEXT/PLAIN; charset=US-ASCII

    Dear Fong-Chin,
    I do not have a Noraxon system, but have requested funds
    for their Telemyo system on a grant that is pending. Can
    you provide me with your impressions of the system, good and
    bad points? I'd appreciate it. Also, I believe that the
    system uses snap on electrodes. If so, I have found that the
    electrodes manufactured by Vermont Medical Inc., Industrial
    Park, Bellows Falls, VT 05101, are ideal for EMG recording.
    I have used them with an old Colbourn EMG system. They adhere
    well to the skin for relatively long time periods and are
    flexible. I have sampled their A10005-5Ot, A10005-T, and
    A10001 (infant sized, breathable) electrodes. I found the
    latter to be most satisfactory.

    Sincerely,
    John Scholz
Working...
X