No announcement yet.

Programming a VCR from a microcomputer

This topic is closed.
  • Filter
  • Time
  • Show
Clear All
new posts

  • Programming a VCR from a microcomputer

    Dear BIOMCH-L Readers,

    We have a Panasonic (National) AG-7350 VCR with an RS-232C add-on which allows
    us to operate the VCR from a microcomputer. We are especially interested in
    taking advantage of the time code generator to control our digitising of

    The product manual is quite helpful, but it lacks sufficient information to
    do all the things we want. I suspect it is a translation from its original
    language as well.

    Are any of our readers famililar with this issue? Can anyone suggest a source
    of 'generic' subroutines, perferably in BASIC or Turbo Pascal, which can help
    us to get up to speed here? Any and all suggestions gratefully accepted (and
    any pertinent info will be posted here as a summary).


    Drew Smith PhD

    ************************************************** ************************
    * Andrew (Drew) Smith, Ph.D. | INTERNET: *
    * Director of Research | BITNET: awsmith@utorgpu *
    * Lyndhurst Spinal Cord Centre | *
    * 520 Sutherland Drive | Home Address: *
    * Toronto ONT Canada M4G 3V9 | 33 Ponymill Drive *
    * (416) 422-5551 x3041,3040 | Scarborough ONT Canada M1V 2X9 *
    * (416) 422-5216 FAX | (416) 609-0469 *
    * "Damn the torpedoes....full steam ahead!" *
    ************************************************** ************************