Tweet
We have a Selspot system which we no longer need, so instead of
simply throwing it away, we thought we would see if anyone else out
there could use it. The price of the entire system would be $4000,
plus shipping. If you only need certain pieces of the system, this
is fine as well, in which case we can work up a price on a per item basis.
If you are interested in either the entire system, or pieces of
it, send me an email with the items you are interested in and what
you are willing to pay.
This offer will be open until the end of May.
Below is an inventory of what we have.
Thanks for your time.
Karl's Selspot Equipment
The following equipment was known to be working the last time we used
it, sometime early 2006.
1 486 66Mhz computer with 640k memory
1 15" monitor
1 ISA interface board to Selspot Administrating unit, with
piggybacked A/D interface board
1 Administrating unit, which contains:
1 Power supply
1 Camera interface module
1 Selspot control module
1 FIFO buffer module
1 Seq module
17 LED 7 (may be one or two which is not working)
2 LED 6
2 LCU units
2 Type 411 cameras
2 Camera interconnect cables
1 Multilab dictionary documentation
1 Multilab reference manual
1 Selspot hardware manual
1 Multilab dictionary manual
1 Multilab collection manual
1 PC data acquisition manual
1 Multilab reference manual
1 Multilab examples 5.25" disk
1 Multilab ver. 2.4-A examples 5.25" disk
1 Multilab ver 2.4-A examples 5.25" disk
1 Multilab ver 2.4-A/Basic program & installation 5.25" disk
1 Multilab ver 2.4-A/Basic environment & utilities 5.25" disk
1 PCI-20074S-3 Syscheck PC system assurance utilities software,
ver 2.1 3.5" disk
1 Selspot Multilab ver 3.1 Pro, program and installation 3.5" disk
1 Selspot Multilab ver 3.1 Pro, environment and utilities 3.5" disk
1 MMA ver. 2.0 3.5" disk
1 Large calibration frame, with LEDs
1 Small calibration frame, with LEDs
Other Selspot Equipment
This equipment was purchased from a third party. We never tested the
hardware, so I can't vouch for it's status, although I assume it works.
1 Administrating unit, which contains:
1 Power supply
1 Camera interface module
2 Selspot control module
3 FIFO buffer module
2 Seq module
1 Analog input module
1 Analog output module
2 Type 411 cameras
1 Selspot prom chips
2 LCUs
4 Calibration frame LEDs
3 LED 2
2 Not sure what these are. Look homemade.
11 LED 7
1 ISA interface board to Selspot Administrating unit
1 PC data acquisition manual
1 Selspot II user manual hardware
1 Multilab reference manual
2 Selspot camera unit
1 Multilab collection manual
1 Multilab dictionary documentation
1 Multilab hardware and Selspot software
Timothy Benner
Computer and Technology Specialist
Penn State University
Department of Kinesiology
tben@psu.edu
865-9544
simply throwing it away, we thought we would see if anyone else out
there could use it. The price of the entire system would be $4000,
plus shipping. If you only need certain pieces of the system, this
is fine as well, in which case we can work up a price on a per item basis.
If you are interested in either the entire system, or pieces of
it, send me an email with the items you are interested in and what
you are willing to pay.
This offer will be open until the end of May.
Below is an inventory of what we have.
Thanks for your time.
Karl's Selspot Equipment
The following equipment was known to be working the last time we used
it, sometime early 2006.
1 486 66Mhz computer with 640k memory
1 15" monitor
1 ISA interface board to Selspot Administrating unit, with
piggybacked A/D interface board
1 Administrating unit, which contains:
1 Power supply
1 Camera interface module
1 Selspot control module
1 FIFO buffer module
1 Seq module
17 LED 7 (may be one or two which is not working)
2 LED 6
2 LCU units
2 Type 411 cameras
2 Camera interconnect cables
1 Multilab dictionary documentation
1 Multilab reference manual
1 Selspot hardware manual
1 Multilab dictionary manual
1 Multilab collection manual
1 PC data acquisition manual
1 Multilab reference manual
1 Multilab examples 5.25" disk
1 Multilab ver. 2.4-A examples 5.25" disk
1 Multilab ver 2.4-A examples 5.25" disk
1 Multilab ver 2.4-A/Basic program & installation 5.25" disk
1 Multilab ver 2.4-A/Basic environment & utilities 5.25" disk
1 PCI-20074S-3 Syscheck PC system assurance utilities software,
ver 2.1 3.5" disk
1 Selspot Multilab ver 3.1 Pro, program and installation 3.5" disk
1 Selspot Multilab ver 3.1 Pro, environment and utilities 3.5" disk
1 MMA ver. 2.0 3.5" disk
1 Large calibration frame, with LEDs
1 Small calibration frame, with LEDs
Other Selspot Equipment
This equipment was purchased from a third party. We never tested the
hardware, so I can't vouch for it's status, although I assume it works.
1 Administrating unit, which contains:
1 Power supply
1 Camera interface module
2 Selspot control module
3 FIFO buffer module
2 Seq module
1 Analog input module
1 Analog output module
2 Type 411 cameras
1 Selspot prom chips
2 LCUs
4 Calibration frame LEDs
3 LED 2
2 Not sure what these are. Look homemade.
11 LED 7
1 ISA interface board to Selspot Administrating unit
1 PC data acquisition manual
1 Selspot II user manual hardware
1 Multilab reference manual
2 Selspot camera unit
1 Multilab collection manual
1 Multilab dictionary documentation
1 Multilab hardware and Selspot software
Timothy Benner
Computer and Technology Specialist
Penn State University
Department of Kinesiology
tben@psu.edu
865-9544