Announcement

Collapse
No announcement yet.

question biomech forum

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • question biomech forum

    Dear Biomech-subscribers,

    I would like your opinion on the following matter, as I don't have
    enough technical background and experience:
    I want to measure the speed of horses passing two pairs of
    photo-electric sensors. The horses are trotting in hand (speed
    approximately 3.5 m/s). The timer interval indicator I connected to
    the sensors has a pulse interval measurement range from 10 ms to 3200 s.
    If I place the sensor pairs 2m apart, then the horse would cover this
    distance in 0.5714 s. But I can also increase the gate length, eg to
    4m. Then the horse would pass in 1.1428 s. The timer has a measurement
    accuracy of +- 0.08% rgd (what does rgd mean??)+- 1 digit. The horses
    are trotting in a straight line of 20 m, and I am collecting kinetic
    data in te central part of this runway. I would like to collect speed
    data with 3 significant digits (cf the interesting discussion on
    significant digits on the forum earlier this year). What gate length
    would be preferable technically? (I supposed a shorter gate lenght)


    Maarten Oosterlinck
    Faculty of Veterinary Medicine
    Ghent University
Working...
X