Tweet
The Laboratory of Biomechanics (Arts et Métiers Paris Tech – CNRS, dir. Pr.
W. Skalli) proposes an:
'Advanced course on patient-specific modelling in biomechanics'
ENSAM, 151 boulevard de l’hôpital 75013 Paris
17th-21st of March 2008
The objective of this course is to provide students with an introduction to
the methods required for patient-specific models. The program is based on 1/
anatomy and clinical issues, 2/ geometric modelling from medical images and
patient specific mesh, 3/materials properties, 4/ Patient-specific loads and
muscle modelling, 5/ models validation, 6/ Applications in biomechanics of
the musculo-skeletal system.
Detailed program on http://www.laboratoire-biomecanique.fr
In addition to a series of lectures,
Three conferences from outstanding speakers:
- Pr. Jean Dubousset, Orthopaedic surgeon, Member of the National
Academy of Medicine
- Pr. Mathias Fink, Physicist, specialist in medical imaging, Member
of the National Academy of Science
- Dr. Jean-Yves Le Coz, Physician and engineer, Head of the car safety
policy department, Renault Group
Laboratory sessions are also organized to guide the students towards a
better understanding of the theoretical concepts.
Contact: david.mitton@paris.ensam.fr
--------------------------------
David MITTON, PhD
Professeur des Universités
Laboratoire de Biomécanique, UMR CNRS 8005
Ecole Nationale Supérieure d'Arts et Métiers
151 bd de l'Hôpital 75013 Paris
Tél : +33 1 44 24 63 64
Fax : +33 1 44 24 63 66
E-mail : david.mitton@paris.ensam.fr
Web : http://www.laboratoire-biomecanique.fr
W. Skalli) proposes an:
'Advanced course on patient-specific modelling in biomechanics'
ENSAM, 151 boulevard de l’hôpital 75013 Paris
17th-21st of March 2008
The objective of this course is to provide students with an introduction to
the methods required for patient-specific models. The program is based on 1/
anatomy and clinical issues, 2/ geometric modelling from medical images and
patient specific mesh, 3/materials properties, 4/ Patient-specific loads and
muscle modelling, 5/ models validation, 6/ Applications in biomechanics of
the musculo-skeletal system.
Detailed program on http://www.laboratoire-biomecanique.fr
In addition to a series of lectures,
Three conferences from outstanding speakers:
- Pr. Jean Dubousset, Orthopaedic surgeon, Member of the National
Academy of Medicine
- Pr. Mathias Fink, Physicist, specialist in medical imaging, Member
of the National Academy of Science
- Dr. Jean-Yves Le Coz, Physician and engineer, Head of the car safety
policy department, Renault Group
Laboratory sessions are also organized to guide the students towards a
better understanding of the theoretical concepts.
Contact: david.mitton@paris.ensam.fr
--------------------------------
David MITTON, PhD
Professeur des Universités
Laboratoire de Biomécanique, UMR CNRS 8005
Ecole Nationale Supérieure d'Arts et Métiers
151 bd de l'Hôpital 75013 Paris
Tél : +33 1 44 24 63 64
Fax : +33 1 44 24 63 66
E-mail : david.mitton@paris.ensam.fr
Web : http://www.laboratoire-biomecanique.fr