Tweet
Hi everyone,
we are giving away casting material for free. It can be used for embedding
specimens for mechanical testing. The special advantage of this casting
material is the low temperature at which it hardens. These components
harden around room temperature unlike for example PMMA. It allows 5 - 7
minutes handling time and is hard after 20 - 30 minutes. Wax, silicone, or
Vaseline for casting release agents can be used. The containers are still
sealed and have been stored in proper manner.
It is a two component easy to use system manufactured by:
EPIC RESINS
600 Industrial Blvd.
Palmyra, WI 53156
Component 1:
Product Class: Polymeric Polyol
Product Code: S7140AS
Ingredients: Polyether Polyol (15%)
Glycol (15%)
Castor Oil (5%)
Texanol Isobutyrate (65%)
Amount: 2 gallons
Component 2:
Product Class: Aromatic Isocyanate
Product Code: S7140B
Ingredients: MDI Mixed Isomers (10%)
High Oligomers of MDI (50%)
Aromatic Diisocyanate (40%)
Amount: 1 gallon
I recommend that only people who have used this material before respond to
this message. Material Safety Data Sheets are available.
This material is FREE, but we expect you to pay the shipping costs.
For more info please contact: Michael Liebschner
802-656-1432
mliebsch@emba.uvm.edu
************************************************** **********
Dipl.-Ing. Michael Liebschner E-mail: mliebsch@emba.uvm.edu
University of Vermont
Mechanical Engineering Phone: (802) 656-1432
119 Votey Building
Burlington, VT 05405 Fax: (802) 656-4441
************************************************** **********
You can not solve problems with the same level of thinking
that existed when the problems were created.
--Dr. Albert Einstein
we are giving away casting material for free. It can be used for embedding
specimens for mechanical testing. The special advantage of this casting
material is the low temperature at which it hardens. These components
harden around room temperature unlike for example PMMA. It allows 5 - 7
minutes handling time and is hard after 20 - 30 minutes. Wax, silicone, or
Vaseline for casting release agents can be used. The containers are still
sealed and have been stored in proper manner.
It is a two component easy to use system manufactured by:
EPIC RESINS
600 Industrial Blvd.
Palmyra, WI 53156
Component 1:
Product Class: Polymeric Polyol
Product Code: S7140AS
Ingredients: Polyether Polyol (15%)
Glycol (15%)
Castor Oil (5%)
Texanol Isobutyrate (65%)
Amount: 2 gallons
Component 2:
Product Class: Aromatic Isocyanate
Product Code: S7140B
Ingredients: MDI Mixed Isomers (10%)
High Oligomers of MDI (50%)
Aromatic Diisocyanate (40%)
Amount: 1 gallon
I recommend that only people who have used this material before respond to
this message. Material Safety Data Sheets are available.
This material is FREE, but we expect you to pay the shipping costs.
For more info please contact: Michael Liebschner
802-656-1432
mliebsch@emba.uvm.edu
************************************************** **********
Dipl.-Ing. Michael Liebschner E-mail: mliebsch@emba.uvm.edu
University of Vermont
Mechanical Engineering Phone: (802) 656-1432
119 Votey Building
Burlington, VT 05405 Fax: (802) 656-4441
************************************************** **********
You can not solve problems with the same level of thinking
that existed when the problems were created.
--Dr. Albert Einstein