Tweet
I want to measure the contact pressure between a ligament and an
adjoining bone during an operation. This would require a thin (less
than 1mm thick), preferably flexible transducer that could be
sterilised and slipped between the ligament and the bone when the
measurement was required.
Any ideas?
Sam.
Dr. Sam Evans,
Medical Systems Engineering Research Unit,
UWC School of Engineering,
PO Box 688, The Parade,
Cardiff CF2 3TE, UK.
Tel. (01222) 874533 or (01222) 874000 x5926
Fax. (01222) 874533
-------------------------------------------------------------------
To unsubscribe send UNSUBSCRIBE BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://www.bme.ccf.org/isb/biomch-l
-------------------------------------------------------------------
adjoining bone during an operation. This would require a thin (less
than 1mm thick), preferably flexible transducer that could be
sterilised and slipped between the ligament and the bone when the
measurement was required.
Any ideas?
Sam.
Dr. Sam Evans,
Medical Systems Engineering Research Unit,
UWC School of Engineering,
PO Box 688, The Parade,
Cardiff CF2 3TE, UK.
Tel. (01222) 874533 or (01222) 874000 x5926
Fax. (01222) 874533
-------------------------------------------------------------------
To unsubscribe send UNSUBSCRIBE BIOMCH-L to LISTSERV@nic.surfnet.nl
For information and archives: http://www.bme.ccf.org/isb/biomch-l
-------------------------------------------------------------------