Announcement

Collapse
No announcement yet.

2nd Int Conf on Eng of Sport

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 2nd Int Conf on Eng of Sport

    20th April 1998

    Dear Colleague,

    Please find below provisional details of papers to be presented at the 2nd
    International Conference on the Engineering of Sport. For a
    registration booklet and further details of the conference or the
    International Sports Engineering Association please contact the conference
    secretariat at a.staley@sheffield.ac.uk.


    *****2nd International Conference on*****
    ********The Engineering of Sport*********
    *********13th to 17th July 1998**********
    **********Sheffield, England*************

    organised by
    **The International Sports Engineering Association**
    **************The University of Sheffield***********

    This conference follows on the success of the 1st International
    Conference on the Engineering of Sport held in Sheffield in 1996. The
    Conference brings together research groups from around the world
    working in the area of Sports Engineering and Technology. The 1998
    Conference will formally launch the International Sports Engineering
    Association and a new journal Sports Engineering, published by
    Blackwell Science.
    Dr Steve Haake
    Chairman
    Organising Committee

    *****Contact Address*****
    Amanda Staley
    Conference Secretariat
    The University of Sheffield
    Department of Mechanical Engineering
    Mappin Street
    Sheffield
    S1 3JD, UK

    Tel: + (0) 114 222 7801
    Fax: + (0) 114 222 7853
    Email: a.staley@sheffield.ac.uk


    *****Venue*****
    The Conference will be held at the University of Sheffield which is
    one of Britain’s leading universities in both research and teaching.
    Sheffield has excellent rail and road links to all parts of the United
    Kingdom and with the London and Manchester International Airports.


    *****Sheffield*****
    The Conference will be held at the University of Sheffield. Sheffield
    is the UK's first National City of Sport and has been recently awarded the
    prestigious £160 million headquarters for the UK Institute of Sport.
    Sheffield boasts some of the best sports facilities in the country and has
    identified sport as its main route to City regeneration.

    *****Accommodation*****
    A number of single en-suite rooms have been reserved at Halifax Hall
    of residence at a cost of £30 per night for bed and breakfast. These
    can be booked directly with the Conference Secretariat. A list of
    alternative Hotels is shown below. Reservations should be made
    directly with the Hotel.

    **Rutland Hotel, 452 Glossop Road, Sheffield, S10 2PY
    Telephone : +(0)114 266 4411
    Fax : +(0)114 267 0348
    (10-15 min walk from conference, 1 Restaurant, lounge, room service, car
    parking)

    **Forte Posthouse, Manchester Road, Sheffield, S10 5DX
    Telephone : + (0)114 267 0067
    Fax: +(0)114 268 2620
    Single 60 GB Pounds
    (10-15 min walk from conference, 1 Restaurant,lounge, room service, car
    parking, swimming pool, exercise facilities)

    **Swallow Hotel, Kenwood Road, Sheffield S7 1NQ
    Telephone: +(0)114 258 3811
    Fax : +(0)114 250 0138
    Single 70 GB Pounds
    Double 80 GB Pounds
    (45 min walk (5 min taxi)from conference, 2 Restaurants,lounge, room
    service, car parking, swimming pool, exercise facilities)


    *****Provisional Conference Programme*****
    Delegates at the Conference will represent 13 countries. Around 70
    papers will be presented at the conference over four days and will be
    published in a hardback book of Proceedings available at the
    conference.The following is a provisional list of papers to be presented.

    Cricket Glove Design
    Cambridge University, UK
    S Alexander, D Underwood, A Cooke

    Cricket ball swing - the Cooke-Lyttleton theory revisited
    University of Newcastle upon Tyne, UK
    A Anderson, C Grant

    Computer simulation of curve-ball kicking in soccer
    Yamagata University, JAPAN
    T Asai, M Nasako, O Murakami, T Akatsuka

    Two direction force measurement transducers
    University of Surrey, UK
    LB Bagesteiro, RAC Laranja, A Tamagna

    Assessing the ergonomics of 2 rucksacks
    LAMIH, France
    F Barbier, O Salom, JCAngue

    New facilities for measurement and modelling of hydrodynamics loads on
    oars blades Ecole Centrale de Nantes, France
    S Barre, J-M Kobus

    The physics of the tennis serve
    University of Pennsylvania, USA
    H Brody

    The parametric design of a chain drive system
    Bristol University, UK
    SC Burgess

    The analysis of cricket ball impacts using digital stroboscopic
    photography University of Sheffield, UK
    M Carre, SJ Haake

    The design of a dry-land ergometer for measurement and manipulation of
    power output from arm-pulling, leg-kicking and whole-body simulated
    swimming De Montfort University Bedford, UK D Cook, KM Maycock, C
    Reavell,
    EM Winter, IL Swaine

    Comparative evaluation of soccer boot traction during cutting
    manoeuvres - a proposed field test methodology Liverpool John Moores
    University, UK
    V Coyles, BL Patritti, MJ Lake

    Force measurement and calculation in sport activities
    Brunel University, UK
    P Dabnichki

    Body protective wear, with particular reference to football injury
    University of Leicester, UK
    D Davey

    Materials innovation in the sports field : results of case studies
    University of Strasbourg II, France
    M Desbordes

    The mechanical and biomechanical performance of sureflex sports
    surface material University of Nottingham, UK
    SJ Dixon, TM Singleton,
    K Al-Shamsi, AC Collop, ME Batt

    The effect of shock absorption sport surfaces in jumping. The
    relation with the standard DIN 18032 Instituto de Biomecanica de
    Valencia (IBV), Spain
    JV Dura

    To a question of the standartization of the programs for the
    biomechanical analysis of the ground reaction forces in sport Russia
    B Dychko

    Mechanical & physical characterisation of ash hurleys
    National University of Ireland, Ireland
    GJ Fahey, CM O'Bradaigh,

    Design of a cricket bat test machine
    University of Newcastle upon Tyne, UK
    C Grant, RA Davidson

    Alpine ski robots and dynamical analysis of skiing turn
    Fukui University, Japan
    K Hasegawa, S Shimizu

    Development of a testing procedure to determine the mechanical and
    physical characteristics of the sliotar National University of
    Ireland, Ireland
    LP Hassett, CM O'Bradaigh

    An anthropometric model and computer simulation for studying the
    interactions between muscle mass, limb inertial properties, and lower
    limb dynamics University of California - Davis, USA
    D Hawkins

    Biofeedback system for training rowers
    University of California - Davis, USA
    D Hawkins

    Development of automatic belaying system for mountain climbers
    Kobe University, JAPAN
    S Ishioka, W Mizutani, K Nakagawa

    Numerical analysis of golf club head at various restitution conditions
    Kobe University, Japan
    T Iwatsubo, S Kawamura, K Miyamoto, T Yamaguchi

    The dynamic calibration of SRM power measuring cranks
    Chichester Institute of Higher Education, UK
    SM Jones, L Passfield

    An experimental study on the mechanics of long parallel turn by direct
    measurement of joint motion and acting forces on the actual skiers
    Kanazawa University, Japan
    H Kagawa, T Yoneyama

    Performance prediction of tennis rackets with different racket head
    size: Impact shock vibrations of a racket grip and
    a player's wrist joint
    Saitama Institute of Technology, Japan
    Y Kawazoe, R Tomosue, K Yoshinari

    The development of a superior performance cricket helmet
    CadCam Technology Ltd, UK
    S Knowles, G Fletcher, R Brooks, S Mather

    Three-dimensional reconstruction accuracy within a calibrated volume
    Roehampton Institute London, UK
    M Lauder, P Dabnichki, RM Bartlett

    Dynamics of the stance phase in sprinting using high-speed digital
    imaging INSEP Campus Olympique Paris, France
    J Loizeau, D Parganin, MP
    Luong

    Non destructive detection of damage in leather using infared
    thermography Ecole Polytechnique, France
    MP Luong, D Parganin, J
    Loizeau

    A design methodology for predicting arrow launch conditions
    GMI Engineering & Management Institute, USA
    T Mase, J Hargrove

    The effect of centrifugal forces on the bending stiffness of a golf
    shaft The University of Nottingham, UK
    JSB Mather

    The measurement of the position of a ball striking a cricket bat
    University of Port Elizabeth, South Africa
    DM McKellar, G Nurick, RA Stretch

    Golf swing robot to realize human skill
    The University of Electro-Communications, Japan
    A Ming, M Kajitani

    Accelerating and decelerating phases of wrist motion
    JAPAN
    K Miura, T Naruo

    The recurrent failure of modern bike components
    University of Bristol, UK
    JE Morgan

    A study of baseball bat performance
    Mizuno Corporation, JAPAN
    T Naruo, F Sato

    A study of methodology about analysing human movement patterns and
    performance using acceleration time series SPINOUT, Japan
    Y Ohgi, T Mokuno, M Yamagishi, C Miyaji

    Infared scanning of damage in Sail Material
    INSEP Campus Olympique Paris, France
    D Parganin, MP Luong, J Loizeau

    Failure of climbing ropes resulting from multiple leader falls
    University of Bristol, UK
    M Pavier

    Performance comparison of conventional and beam suspension bicycle
    designs under constant vibration McGill University, Canada
    DJ Pearsall, T Blane Hoshizaki, R Turcotte, DL Montgomery, E Spyrou

    Finite element impact analysis of a flexible cricket bat for design
    optimisation The University of Sheffield, UK
    JMT Penrose

    A computational study of the double pendulum model of the golf swing
    The University of Sheffield, UK
    WM Pickering

    Generation of design and testing criteria of seats for sports
    facilities Instituto de Biomecanica de Valencia (IBV), Spain
    R Porcar, A Page, D Ayora, JV Dura

    Design of a technique to measure joint forces and moments in
    wheelchair propulsion Orthopedic Biomechanics Laboratory, USA
    M Sabick, HW Wu, FC Su

    Vibration characteristic of driving bicycles/characteristics of road
    racer bicycles Yamaguchi University, Japan
    T Saito

    Simulation of a ski turn
    Chubu University, JAPAN
    T Sakata, T Ito

    Interest of a tissular strain evaluation method for the design of
    sports equipments: application to mountaineering backpacks Decathlon
    Production, France
    O Salom, P Galliot, P Lecuyer

    The quantitative measurement of Taekwondo kicking movement
    Institute of Coaching Science, Taiwan
    T-Y Shiang, K-M Chou

    The kinetic characteristics of rowing movement
    Institute of Coaching Science, TAIWAN
    T-Y Shiang, C-B Tsai

    Fundamental study for the design of a ski robot using actuators to
    simulate human muscular characteristics
    Nagaoka University of Technology, Japan
    A Shionoya, Y Sakurai, M Yachida, M Hasegawa, H Miyake

    Evaluation and design optimisation of sports technology based on
    structural dynamic modelling RMIT University, Australia
    A Subic

    Engineering of sports equipment; application to skiing, golf and
    cycling LGMT, France P Swider, O Mouzin, B Le Fichoux-Chemli

    Experimental determination of snow resistance forces acting on a
    turning snow ski Chuo University, Japan
    N Tada, Y Hirano

    Engineering the worlds fastest bicycle
    RMIT University, Australia
    LA Thompson

    Method of measurement and evaluation for the mechanical
    characteristics of running shoes Tokyo Institute of Technology, Japan
    S Ujihashi, SH Woo, N Inou

    A hybrid approach to the compliance testing of training shoes
    University of Strathclyde, UK
    C Walker

    The concept of positive and negative signs for work, power and energy,
    and their special meaning in biomechanics Liverpool University,
    W Wang, RH Crompton, MM Gunther, Yu Li,

    Timing light tutorial
    United States Olympic Committee, USA
    TM Westenburg

    Study on the relation between turning motion and the reacting forces
    using a skiing robot Kanazawa University, JAPAN
    T Yoneyama, H Kagawa

    *************************************
    Dr Steve Haake,
    Sports Engineering Research Group,
    Department of Mechanical Engineering,
    The University of Sheffield,
    Mappin Street,
    Sheffield, S1 3JD,
    United Kingdom.

    Tel (+114) 222 7739
    Fax (+114) 222 7853
    *************************************


    *************************************
    Dr Steve Haake,
    Sports Engineering Research Group,
    Department of Mechanical Engineering,
    The University of Sheffield,
    Mappin Street,
    Sheffield, S1 3JD,
    United Kingdom.

    Tel (+114) 222 7739
    Fax (+114) 222 7853
    *************************************

    -------------------------------------------------------------------
    To unsubscribe send UNSUBSCRIBE BIOMCH-L to LISTSERV@nic.surfnet.nl
    For information and archives: http://www.bme.ccf.org/isb/biomch-l
    -------------------------------------------------------------------
Working...
X