Announcement

Collapse
No announcement yet.

FYI: C3D m-file

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • FYI: C3D m-file

    For those of you who are using "getc3d.m" for Vicon, the MATLAB script reading c3d files. If there's continuing interest, I'll revise the script to address most problems.

    KJK

    -----Original Message-----
    From: Dr. Chris Kirtley [SMTP:rskirt@polyu.edu.hk]
    Sent: Tuesday, October 20, 1998 10:46 PM
    To: Kyu-Jung Kim, Ph.D.
    Subject: Re: C3D m-file

    Dear Kyu-Jung,

    Thanks for getting back to me. In fact I just figured out what should be done - Vicon uses DEC format, so I needed to say:
    fopen(fname,'r+','d')
    ^^^

    This is for VAX D floating point numbers. After that small adjustment everything looks fine - 3 days work for three characters!
    Thanks again,

    Chris
    --
    Dr. Chris Kirtley MD PhD
    Assistant Professor
    Dept. of Rehabilitation Sciences
    The Hong Kong Polytehnic University
    Hung Hom Hong Kong

    Tel +852 2766 6755
    Fax +852 2330 8656
    WWW http://www.polyu.edu.hk/cga

    -------------------------------------------------------------------
    To unsubscribe send UNSUBSCRIBE BIOMCH-L to LISTSERV@nic.surfnet.nl
    For information and archives: http://www.bme.ccf.org/isb/biomch-l
    -------------------------------------------------------------------
Working...
X