For those who like to use getc3d.m file, please visit ISB website at www.lri/ccf/org/isb/biomch-l/search.html and search for getc3d. It will provide the code and description how to use. Thanks for all the replies.


-----Original Message-----
From: Nick Brown []
Sent: Wednesday, October 21, 1998 4:28 PM
To: Kyu-Jung Kim, Ph.D.
Subject: Re: FYI: C3D m-file

I use matlab regularily and now the vicon 140 system. I would love to see
the get3cd file and I would be gratefeul if you could direct me where I
might find this.

Thank you in advance
Nick Brown
U of Texas

At 08:33 AM 10/21/98 -0500, you wrote:
>For those of you who are using "getc3d.m" for Vicon, the MATLAB script
reading c3d files. If there's continuing interest, I'll revise the script to
address most problems.
>-----Original Message-----
>From: Dr. Chris Kirtley []
>Sent: Tuesday, October 20, 1998 10:46 PM
>To: Kyu-Jung Kim, Ph.D.
>Subject: Re: C3D m-file
>Dear Kyu-Jung,
>Thanks for getting back to me. In fact I just figured out what should be
done - Vicon uses DEC format, so I needed to say:
> ^^^
>This is for VAX D floating point numbers. After that small adjustment
everything looks fine - 3 days work for three characters!
>Thanks again,
>Dr. Chris Kirtley MD PhD
>Assistant Professor
>Dept. of Rehabilitation Sciences
>The Hong Kong Polytehnic University
>Hung Hom Hong Kong
>Tel +852 2766 6755
>Fax +852 2330 8656
>To unsubscribe send UNSUBSCRIBE BIOMCH-L to
>For information and archives:

To unsubscribe send UNSUBSCRIBE BIOMCH-L to
For information and archives: