No announcement yet.

Re: FYI: C3D m-file

This topic is closed.
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: FYI: C3D m-file

    For those who like to use getc3d.m file, please visit ISB website at www.lri/ccf/org/isb/biomch-l/search.html and search for getc3d. It will provide the code and description how to use. Thanks for all the replies.


    -----Original Message-----
    From: Nick Brown []
    Sent: Wednesday, October 21, 1998 4:28 PM
    To: Kyu-Jung Kim, Ph.D.
    Subject: Re: FYI: C3D m-file

    I use matlab regularily and now the vicon 140 system. I would love to see
    the get3cd file and I would be gratefeul if you could direct me where I
    might find this.

    Thank you in advance
    Nick Brown
    U of Texas

    At 08:33 AM 10/21/98 -0500, you wrote:
    >For those of you who are using "getc3d.m" for Vicon, the MATLAB script
    reading c3d files. If there's continuing interest, I'll revise the script to
    address most problems.
    >-----Original Message-----
    >From: Dr. Chris Kirtley []
    >Sent: Tuesday, October 20, 1998 10:46 PM
    >To: Kyu-Jung Kim, Ph.D.
    >Subject: Re: C3D m-file
    >Dear Kyu-Jung,
    >Thanks for getting back to me. In fact I just figured out what should be
    done - Vicon uses DEC format, so I needed to say:
    > ^^^
    >This is for VAX D floating point numbers. After that small adjustment
    everything looks fine - 3 days work for three characters!
    >Thanks again,
    >Dr. Chris Kirtley MD PhD
    >Assistant Professor
    >Dept. of Rehabilitation Sciences
    >The Hong Kong Polytehnic University
    >Hung Hom Hong Kong
    >Tel +852 2766 6755
    >Fax +852 2330 8656
    >To unsubscribe send UNSUBSCRIBE BIOMCH-L to
    >For information and archives:

    To unsubscribe send UNSUBSCRIBE BIOMCH-L to
    For information and archives: