Tweet
Simpleware is pleased to invite you to our upcoming workshops:
Image-based Simulation for Biomechanics, Materials Applications, and Reverse Engineering
This workshop is aimed at those interested in 3D reconstruction from radiology images, and in using 3D image data (as obtained from CT, Micro-CT, MRI and Ultrasound) to generate Rapid Prototyping, CAD, and Finite Element models.
Participants will learn:
• how to generate computer models from your 3D image data
• how to import and position CAD files in the image data
• how to integrate with CAD Software as well as FE solvers such as Ansys, Abaqus, Comsol, LS-Dyna, etc.
• how to use Simpleware software for specific applications, e.g. medical engineering, and materials science, reverse engineering, etc.
The workshop is FREE but pre-registration is required as places are limited. To register and for further information, please visit our website: http://www.simpleware.co.uk/news-and...nts/workshops/
Upcoming workshops:
Columbus, OH: Room 205, Bevis Hall, Ohio State University, Columbus, Ohio
Thursday, 17 November 2011 (3.30 – 5pm)
Eindhoven, Netherlands: Room 3, MMP building , Eindhoven University of Technology, The Netherlands
Wednesday, 30 November 2011 (1 – 5pm)
Delft, Netherlands: PC Room 0.20, Building 23, Steinweg 1, TU Delft, The Netherlands
Thursday, 1 December 2011 (1 – 5pm)
Twente, Netherlands: Room T1300, Building: the Horst, Twente University, The Netherlands
Friday, 2 December 2011 (9.30am – 1pm)
New York, USA: Room 825, Department of Biomaterial and Biomimetics (8 Floor), NYU College of Dentistry, New York
Monday, 5 December 2011 (10.30am – 12pm)
New York, USA: Lecture Room (First Floor), Steinman Hall, CCNY Grove School of Engineering, New York
Wednesday, 7 December 2011 (3 – 4.30pm)
Image-based Simulation for Biomechanics, Materials Applications, and Reverse Engineering
This workshop is aimed at those interested in 3D reconstruction from radiology images, and in using 3D image data (as obtained from CT, Micro-CT, MRI and Ultrasound) to generate Rapid Prototyping, CAD, and Finite Element models.
Participants will learn:
• how to generate computer models from your 3D image data
• how to import and position CAD files in the image data
• how to integrate with CAD Software as well as FE solvers such as Ansys, Abaqus, Comsol, LS-Dyna, etc.
• how to use Simpleware software for specific applications, e.g. medical engineering, and materials science, reverse engineering, etc.
The workshop is FREE but pre-registration is required as places are limited. To register and for further information, please visit our website: http://www.simpleware.co.uk/news-and...nts/workshops/
Upcoming workshops:
Columbus, OH: Room 205, Bevis Hall, Ohio State University, Columbus, Ohio
Thursday, 17 November 2011 (3.30 – 5pm)
Eindhoven, Netherlands: Room 3, MMP building , Eindhoven University of Technology, The Netherlands
Wednesday, 30 November 2011 (1 – 5pm)
Delft, Netherlands: PC Room 0.20, Building 23, Steinweg 1, TU Delft, The Netherlands
Thursday, 1 December 2011 (1 – 5pm)
Twente, Netherlands: Room T1300, Building: the Horst, Twente University, The Netherlands
Friday, 2 December 2011 (9.30am – 1pm)
New York, USA: Room 825, Department of Biomaterial and Biomimetics (8 Floor), NYU College of Dentistry, New York
Monday, 5 December 2011 (10.30am – 12pm)
New York, USA: Lecture Room (First Floor), Steinman Hall, CCNY Grove School of Engineering, New York
Wednesday, 7 December 2011 (3 – 4.30pm)